What need to attention when use IKEYCUTTER CONDOR XC-007 Key Cutting Tool?

IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine is powerful and easy to use with most advanced software and precised mechanism.It supports multi-brand models cars key cutiing.

Acura, AlfaRomeo, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Citroen, Daihatsu, Dodge, Ducati, Ferrari, Fiat, Ford, GCC, GMC, GreatWall, Holden, Honda, Hummer, Hyundai, Infiniti, Iveco, Jaguar, Jeep, Kia, Lancia, LandRover, LDV, Lexus, Lincoln, MAN, Mazda, Mercedes, Mercury, Mini, Mitsubishi, Nissan, Opel, Peugeot, Piaggio, Porsche, Proton, Renault, Rover, Saab, Scania, Seat, Skoda, Ssangyong, Subaru, Suzuki, Toyota, Vauxhall, Volkswagen, Volvo

2.Attention when you use IKEYCUTTER CONDOR XC-007:

1. Our Ikeycutter can’t choose 4-5 Cut for SX9, as we don’t have the right fixture at present
2. In order to cut the Ford TIBBE keyblade, you will need to purchase an additional x3 fixture

 

 

How to find out the cutting code of IKEYCUTTER CONDOR XC-007?

IKEYCUTTER CONDOR XC-007 Key Cutting Tool is powerful and easy to use with most advanced software and precised mechanism,xc-007 can support multi-brand cars.

A. If you lost all of your car keys, there are three ways to find out the cutting code:

1. Get the cutting code from your 4S dealerships by providing them your VIN;
2. Search your records to find the cutting code if you have written it down before;
3. The cutting code can also be found on your car’s lock.

After finding out the cutting code, input it to IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine, you will get the key information needed for matching a new key.

Some car models are available to get their cutting code by using a certain software. For example, VVDI is able to read PIN, CS and MAC code for the cars with ECU MED17 or EDC17 by OBD, to work with IKEYCUTTER CONDOR XC-007, they together can program a car key for some VW vehicles,

If you are a locksmith, you can also get the cutting code in your own way.

B. You can also use KEYCUTTER CONDOR XC-007 to copy a new spare key, just insert the original key into KEYCUTTER CONDOR XC-007, you will be able to copy a new key after the key is indentified by the machine.

 

Newest MB star C4 supprots wireless diagnose

The super MB SD C4 dd the newest function: can support wireless diagnose. 2013.03 Newest version MB SD Connect C4 with wifi, it support K line,CAN BUS and UDS protocol, fit all computers,with multi-language. And it supports reading out & erasing trouble code, reading the real-time data of sensor and actuator, coding and programming, it also support WIFI.

The following will teach you how to connect MB STAR compact C4 in a wireless infrastructure.

1. You can set your router to have any SSID name. I set mine as workshop, I do recommended you to use a network key in the following format A123456789365 the number portion can be any combination. I have tested using various SSID names and any seem to work fine.

2. Go to start menu, programs, service, setup Sdnet control and run it, once finished pc will reboot, I also suggest you delete the configuration from the SD connect. this is to start fresh.

3. Go to F:programmeDasbin and open the cal.ini file, you will need to modify from either T or D2 to W.

4. Be certain all WIFI and Lan drivers are installed and that you are connected to the wifi network you will be using. (During this entire process you should monitor the wifi status as it has a tendency to disconnect at times)

5. we now need to obtain some basic info from your network, go to start menu, settings, control panel and open network connections, double click the wireless network connection once window is open click support tab you will need to write down the IP address and the default gateway of your system so we can enter them later in SDNC.

6. Now go to the SDNC control panel by clicking theMB SD C4 connect icon once, after it is open select the configuration tab, click yes in the window that opens, now go to network, once open start at the bottom, for country settings leave them set to world, For Road WLAN enter values below: IP address: 192.168.2.222 Subnet mask: 255.255.255.0 Network name: (ssid) Road24h Network authentication: open (wep128) Select hexadecimal and enter 26 lowercase a.

7. Now for Workshop WLAN Check the box to Automatically obtain IP address, enter your network name [SSID] mine is workshop enter Network authentication: WPAPSK [TKIP] a123456789012

8. Workshop cable network enter following values: IP address: 169.254.214.163 subnet mask: 255.255.0.0 Once complete click ok.

9. next we need to manually set the IP address for the SDconnect, this will override the steps we took in item 8 above, we entered the 169 IP only so it would allow us to save the other changes we made within SDNC, if the IP was wrong we could not save any changes. Open control panel then network connections. double click local area connection, in the window labeled “this connection uses the following items: look for Internet Protocol (TCP/IP) usually at bottom and double click it select Obtain an IP address automatically and click ok. now go back and click Internet Protocol (TCP/IP) again now select Use the following IP address and enter 172.29.127.112 hit the tab key to auto fill in the subnet mask and click ok then ok once again on the open window, when complete that window will automatically close may take a few moments for the IP to save and register. also make sure the wifi connection is still connected to your network, it may disconnect after we enter values in SDNC

10. Now we need to power up the SDconnect of MB SD C4 using a 12v source. and connect to the pc via LAN cable, once it is powered up you will need to register/configure SDconnect. do this by going to the taskbar and click on the SDconnect icon once to open it. Once open click on Configuration tab then click yes on the pop-up window, next go to the MUX tab then click Register/configure this will open the SDconnect tool kit. Once open you can modify the settings that will allow wireless communication. first choose a number for your SDconnect, I use 9, next region select WORLD, place a check mark in the square next to WLANprameters,workshop, also place a check mark in the box to right of the DHCP line, enter the laptop you are using IP address, in my case it was 192.168.0.9 then enter router IP under Gateway which in my case was 192.168.0.1. for SSID [router name] enter name of your wifi network, as stated earlier mine is workshop, for my encryption I used WPA2 / ASCII my key is A123456789365, after all is entered click the start tab, a window showing saved configuration will display click ok then close on SDconnect tool kit window. 11. You can test connection by unplugging the LAN cable from PC or SDconnect then click the number next to the pad lock icon, when window opens click the test signal tab you should hear an audible beep from SDconnect unit. in some situations the box next to the SDconnect icon will be grey with a red X you must click the grey box and select your MB SD Connect Compact 4, connect from the list.

MB SD Connect Compact C4 software fail to test

When the car starts and all cables are connected well, the software driver is installed, but it fails to test, the first thing to do is self-test, self-test can help make sure whether the hardware is working or not. Take my own story for example, several days, when I start DAS, it says it is developer version, but the software is developer version under some menus. I am NOT connected to the internet when diagnosing a car, only the SD-Box is connected to the notebook via WLAN. Is it or is it not a developer version?

Then I need to firstly well set the MB SD C4, then go to self-test C4, finally find out where is the problem according to the self-test results. I would like to share the steps on self-test.

Step 1: click “STAR UTILITIES”.

Step 2: Click “Self Diagnosis” and then click “CAESAR Self Diagnosis”.

Step 3: under SDconnect Toolkit, the toolkit is being initialized, several seconds later, the self-test has started, I find the signal light is receiving sign, and SDconnect name displays Part D and the Power supply display “Vehicle”, the process display the procedure.

Step 4: after the self-test is finished, again click “CAESAR Self Diagnosis” to open the self-test report. Take the following report for example, the following reports shows MB SD C4 has no problem.

Device: Part D
Toolkit-Resultcode:1

SDconnect Toolkit – device diagnostic – Part D
===========================================
CAESAR STOS+Rev: 2.12 from Jun 16 2005
generated protocol file from 12.12.2010 04:01
SystemCheck :
Check serial ………..0 OK
CAESAR  HW Detection :
D2Access… 0 OK
D2DownLoad …0 OK

CAESAR Part D2 detected on COM2 WITH baudrate: 19200
CAESAR version check:
D2CheckSNVER…0 OK
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial number 029866

MB SD C4 FAQ:

Q: Does MB SD Connect Compact 4 contain SATA HDD?

A: There are three kinds of hard disk formats for SD C4 2013.03, including: for Dell D630, for T30 and moveable hard disk, and only two kinds of format for SD C4 2013.05, including: for Dell D630and moveable hard disk. Do they contain SATA HDD? It depends on which kinds of HDD, please write a note which format you need when ordering.

Q:  Is MB SD C4 compatible with window7?

A: moveable hard disk version is compatible with WIN7, better Professional version. But suggest you not use WIN7, 90% sdc4 software get broken because of the usage of WIN7.

Q: I have blue screen after insert MB SD Connect Compact 4 Dell D60 hard disk into the computer and open it.

A: make sure your Dell D630 computer is integrated video card and with 1GB memory, because the D630 of discrete video card is easy to have blue screen or shutdown and restart, restart and shutdown. …..

Q: Is DAS available with 21 languages and optional to reset? Or only English available?

A: The DAS on the desktop is only English available, after enter into Xentry you are allowed to set the language you want. Just enter into Xentry whatever car models you want to diagnose, and if the car model should be diagnosed and programmed in the DAS but you enter Xentry, it will automatically switch into DAS and the DAS language will be as the same as the Xenty language.

What is the difference between all UPA USB Programmer?

As an ECU programmer, upa usb wins customers’ satisfaction for its reasonable price and stable function. There are three types of upa usb on our website. The function and supported ECU models are almost the same, the difference of them are manufacturers and colors.

What ECU models that upa usb supported?

Motorola HC05*

Motorola HC08*

Motorola HC11*

Motorola HC12*

Motorola HCS12*

Freescale (Motorola) HCS12X*

Freescale (Motorola) HCS12XE*

Atmel 8051 Architecture

Atmel AVR 8-Bit Risk

Microchip PIC12

Microchip PIC16

EEPROMs I2C

EEPROMs Microwire

EEPROMs SPI

The new added function of car key programmer UPA-USB

The newest version of  upa usb is 2014 V1.3.0.14, and it’s without adaptors.

New added function:
+ Added MC9S12HY64/HA32 support
+ Added Serial Flash memorysupport: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A
+ Added 24C1024, 24C1025 support
+ Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675 + Added script function GetPage
+ Added script function AutoBaudRateDevice (hc08 devices only)
+ Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl
+ Added script function EnablePicMemoryAreas( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean;
+ Fixed bug with script functions ProgramDevice, ReadDevice … when used with PICs
+Fixed bug with SetHC08SecurityBytes(SecBytes: string) function + Fixed bug with 68hc11 reading if Oscillator is not set to Auto +Updated script example files
+ The software is digitally signed upa usb
+ USB driver upausb.sys is digitally signed and can be used with 64-bit windows XP/Vista/7